Icelandic Pumpernickel (Rye) Bread アイスランドのライ麦パン

My wife wanted to use pumpernickel flour (whole or dark rye flour) before it gets too old. We have already made “classic” pumpernickel bread and also German Black (Pumpernickel) boule. We found a recipe for “Icelandic Rye (pumpernickel) bread” at King Arthur Flour website. The recipe appeared interesting. Since it is a “soda” bread, my wife took the initiative for making it (soda bread is not my shtick). This bread turned out to be pretty good and the texture/density is something between the classic pumpernickel bread and Pumpernickel boule (picture #1). It is a bit sweeter and made perfect sandwich bread (picture #2).

This was a lunch. We happened to have a hot smoked (in Weber grill) pork roast. I made sandwiches with avocado slices, mayo and Dijon mustard.

Ingredients:
4 1/2 cups (477g) Pumpernickel Flour (original recipe calls for “medium” rye flour)
2 teaspoons table salt
1 tablespoon baking powder 
3/4 teaspoon baking soda 
2 cups (454g) buttermilk 
1/2 cup (168g) honey
1/2 cup (170g) molasses

Directions:
Preheat the oven to 325°F with a rack in the center position.
In a large bowl, whisk together the flour, salt, baking powder, and baking soda.
In a separate bowl, whisk together the buttermilk, honey, and molasses.
Pour the wet ingredients into the dry ingredients, stirring to combine.
Transfer the batter to a lightly greased 9" pain de mille (pullman) pan and smooth the top. Lightly grease the lid, and place the lid on the pan. (We do not have a pullman pan so I just used a regular loaf pan. Luckily I put a tray underneath because the batter over flowed the loaf pan big time). Next time I will put the batter into two loaf pans.) 
Bake the bread for 2 hours. Turn off the oven and remove the lid from the pan. Leave the loaf in the turned-off oven for another 15 minutes, then remove from the oven and turn out of the pan onto a cooling rack.

Since this bread is denser than usual sandwich bread, I sliced it a bit thinly and made perfect roast pork sandwiches. 

Home Coffee Roasting 緑コーヒー豆の自家焙煎

I do not remember when I started home roasting green coffee beans but it was sometime ago. I started with  an electric popcorn popper, then over time used 4-5 different hot air roasters (many broke, some were discontinued. Only one hot air roaster is still working but I am not using it any longer). I also had a drum  roaster (Behmor 1600) on which I upgraded the control panel and it is still working but is a bit unreliable.  I am currently using a “Gene Cafe” roaster (picture #1).  I am not sure this should be classified as a drum or hot air roaster. It is probably more along the line of the hot air roaster.

General summary: Most roasters are too loud to hear the both the first and second cracks which are important determinants of the stage of roasting the beans have achieved. The roasters also produce a lot of smoke so they have to be used outside or in very well ventilated spaces. Over time, however,  I have discovered that the shape of some of the roasters make it possible to temporarily attach a drier vent duct to the roaster to channel the smoke directly up to the vent hood over the stove. With this temporary set-up the roaster can be used indoors under the hood. All the roasters, especially hot air roasters, are quite sensitive to ambient temperature as well as the voltage fluctuation. Some models have, although limited, programable temperature profiles. For some roasters the amount of green beans you can roast is also limited.

1. Hot air roasters: This type is easy to use but you cannot hear the first or second cracks to judge the roasting stages due to the loud noise made by the machine.

2. Drum roaster: Behmor 1600 (the current model is 2000AB plus) is the only drum roaster I have used. This is composed of a wire mesh drum and a radiant heat source in the back of the drum. This is a very quiet machine and I could hear both first and second cracks. There are some roasting programs you can choose or you could use your  own temperature profile. This worked well but their “smoke suppression system” does not really work and there was no way to attach a drier duct for venting so I could only use this machine outside. In addition the chaff collector is not very convenient and, in general, cleaning is not easy. The capacity is unusually large and it can roast up to 1 pound. The newer model appears to have more controls and other improvements. Over time and with much use the machine became unreliable. The drum would stop turning in the middle of roasting. I would have to shut off the machine and then restart it. As a result I would lose control of the timing of the roast and the beans would come out over or under roasted.

3. Current roaster: Gene Cafe, It has an off-axis glass cylinder drum and you can clearly see the beans while roasting (picture #1) . The chaff collector is large and quite good and allows the attachment of the clothes drier duct and can be used in-doors under the hood. When used outside without the noise of an exhaust fan under the hood I can hear the first crack very well but the second crack is difficult to hear. When used in-doors with an exhaust fan going, I cannot hear either of the cracks. It can roast up to 8oz of coffee in one batch. I am reasonably satisfied with this roaster but cooling takes a long time and chaff removal is not perfect.

To compensate these two short comings, recently, I added another coffee roasting contraption which is the “coffee cooling tray” (picture #2). This is rather simple device but works well. The fan and motor are located at the bottom layer sucking air from top and out. The top sieve has a coarse metal screen where the hot coffee beans get placed (#3) and the middle sieve has a fine metal screen to catch the chaff (#4).

A tiny metal “shovel” is included for stirring (#3).

While cooling, stirring the beans further removes the chaff which is collected in the second sieve (#4).

The hot coffee beans cool down very quickly and quite more chaff comes off. One of the major difficulties is that the Gene Cafe is not designed to be used with an external cooler. After it goes into the cool down cycle, the temperature has to come down below a certain level (I have not determined the exact temp) before you can stop and remove the cylinder/drum which defeats having the external cooling tray. The only way you can remove the cylinder while it is hot is to force it off (by unplugging the machine), removing  the cylinder and dumping the hot coffee beans into the cooling tray. This may not be good for the roaster, however. So, this is what I came up with.

1. I line up an extra roasting cylinder and the cooling tray turned on next to the roaster.

2. After the roasting is completed, I put the roaster into the cooling cycle. Wait about 1 minute until the temperature comes down below 400F then unplug the machine (making sure the cylinder position allows me to remove the cylinder when it stops). 

3. I remove the cylinder and dump the hot coffee beans into the cooling tray and place the spare cylinder back into the roaster(You could put back the original cylinder after dumping the beans but this is difficult since the cylinder is hot and seemingly expands enough to make putting it back more difficult.)

4. Plug the roaster back in and turned it on.  Start “roasting” and immediately turn it to the cooling cycle and let it cool down until it stops. (I am hoping this procedure is the least harmful for the roaster).

So, is all this effort worth it? Although I think I know what I like in my coffee/expresso drinks, I am not sure I can differentiate beans cooled quickly vs slowly in the roaster cooling cycle.  Other factors such as beans, roasting level, grind, how the espresso is brewed may make more significant differences. Never-the-less, I try to do everything in the right and consistent way so that I can have coffee we like.

Tofu, Egg and Garlic Chives Stir Fry 豆腐ニラ玉、木耳入り

This is one of the left-over control dishes. I had a package of “medium firm” tofu 豆腐 which just reached “BUB” (Best Used By) date, the last of garlic chive ニラand wood ear mushroom 木耳. So, I made this dish for lunch one day. I sort of got an idea from some of the recipes I saw on the Web and YouTube. Based on my memory and CCK (Common Culinary Knowledge) I  winged it. The seasonings could be improved but overall this was a quite good satisfying dish and fairly healthy and nearly vegetarian (I am not sure if oyster sauce really contains oysters or their derivatives). Depending on how much seasoning you add, this could be a side dish for rice but I seasoned it lightly and we had it as a main dish for lunch.

Ingredients:
One package of tofu (I used medium firm but firm would be good), drained and cut into cubes (#1 in the composite picture).
Two eggs, beaten and seasoned with a pinch of salt (#2)
Wood ear mushroom (optional, this was leftover, I blanched, washed it previously and cut into small trips, the amount is arbitrary) (#4)
Garlic chive, washed and cut into short segments, the amount arbitrary (#4)
2 tbs vegetable oil or peanut oil and a splash of dark sesame oil

Seasonings (#2): (premix, #2)
2 tbs oyster sauce
2 tbs soy sauce
2 tbs Shaoxing wine (or dry sherry or mirin, which makes it sweeter, or sake)

1 tsp Ponzu sauce

Directions:
Add the oil to the non-stick frying pan on medium high flame and cook turning once or twice until the surface is lightly browned (2-3 minutes) (#1 in the composite picture)
Reduce the flame to medium and pour in the egg mixture (#3) cook until the edges are set and gently turn and coat the tofu cubes
Add the seasonings and cook for 30 seconds mixing gently
Add the garlic chive and wood ear mushroom (#4)
Mix and toss to combine for 30 seconds to 1 minute
Splash the ponzu sauce and a small amount of sesame oil and mix to finish

I felt a bit self righteous finishing up the tofu, garlic chive and wood ear mushrooms by making this dish and nothing wasted. But better yet it was pretty good. The tofu went extremely well with the egg coating. The tofu and egg had similar texture but each brought a slightly different taste which was interesting in the same bite. The wood ear mushroom brought its own element to the dish in the form of a slight crunchiness that offset the tofu/egg texture. The garlic chive contributed a distinctly but mild garlic taste. Not a bad left-over control dish which can bear repeating. 

Cucumber in soy sauce 胡瓜の醤油漬け

I would like to have fresh cucumbers (if available Japanese cucumber but American mini-cucumber is a great substitute). Usually American min-cucumbers come in a pack of 6. If not used within 2-3 days, they go bad (white specks, either bacteria or fungus, develop on the surface).  I make several kinds of cucumber salads and pickles in an attempt to use up the cucumbers.  Currently our favorite pickled cucumber is using leftover pickling liquid after making the daikon pickles. In addition, I also try to preserve fresh cucumbers by placing them in a Ziploc bag and pouring enough Vodka to coat all the surface plus a bit more and then I squeeze out as much air from the bag as I can. With this treatment, the fresh cucumber last about one week or a bit more. I am always looking for other recipes to use cucumbers. I saw this recipe in one of the Ko Kentetsu You Tube episodes. It is easy enough and looks interesting. This is marinated about 3 days. It is still crunchy. Soy sauce and vinegar make the foundation but the addition of ginger and a small slash of dark sesame oil really make it.

Ingredients:
3 American mini-cucumbers or 2 Japanese cucumbers. 
Fine julienne of ginger root

Marinade:
1 tbs sugar
2 tbs soy sauce
2 tbs rice vinegar
Small splash of dark sesame oil

Directions:
Cut the cucumbers length wise in half
Remove the seeds using a small spoon
Cut the cucumber on a bias in bite sized pieces

Add the cucumber, ginger and the marinade to a sealable container. Close the container and refrigerate. 

You can enjoy this immediately or in few days.

We like this. It is very easy to make and slight sweetness combided with the sesame oil and ginger really make this a good side dish or “Hashi-yasume” 箸休め meaning “chopsticks rest” so that the chopsticks take a brief rest after heavy lifting of main dishes.

Dassai 45 and Dassai blue comparison 獺祭45とDassai Blue 50 の飲み比べ

“Dassai” 獺祭 is a well known and popular sake in Japan and US. We like it for its very clean, fruity flavors. We used to get  “Dassai 50” daiginjo 獺祭50大吟醸. But the Dassai 50 is not sold any more. It was replaced by “Dassai 45” in 2019 (In Dassai 50, the sake rice is polished to 50% of the original volume, in Dassai 45, it is polished to 45%).  We learned that Dassai (brewed by Asahi Sake Brewery 朝日酒造 in Yamaguchi 山口県) established a sake brewery in Hyde Park, NY some years ago. However, this is the first time we obtained several bottles of  the NY-brewed sake “Dassai Blue 50”.  Interestingly, Dassai Blue is labeled as “Type 50”. I assume that indicates 50% polish like the old Dassai 50. My understanding based on an article I read,  was that they used imported Japanese “Yamada Nishiki” 山田錦 sake rice. But another source of information (again, not their website) indicated the rice is grown in Arkansas. (Further more, I would have to wonder what water source* they are using in the brewing; NY tap water, Hudson river water, or Hyde Park artesian well water???) In any case, one evening we compared Dassai blue and Dassai 45 (picture #1).

*One on-line store website indicates the sauce of the water is a “local well”. But again, this is unofficial information.

The Dassai Blue, when first tasted, has a definitive tingling/prickly sensation on the tip of the tongue. It is like very lightly effervescent. Then comes a very subtly sweet and Dassai signature fruity taste.  As it sits in the glass, the tingling character diminishes indicating indeed this might be the effervescence. The “Dassai Blue” label indicated “keep refrigerated”. I wonder if the label “keep refrigerated” means, “Blue”may be  “Nama” sake 生酒** or not heat-treated and slight fermentation happened in the bottle producing the effervescence. (Again no details are available from the brewery and these are all our conjuncture).

**Another unofficial information indicated “Blue” only had one “hi-ire” 火入れ heat-treatment instead of  usual  two (after pressing and bottling).

The Dassai 45 is a classic Dassai, clean, fruity and smooth in the mouth—no effervescence or tingly sensation.

Which one do we like better? It is hard to say. Dassai Blue’s tingling sensation is not unpleasant (we had similar effervescence in other “non-sparkling” sake). According to the label (picture #2), they are aiming to surpass Dassai brewed in Japan but not just to reproduce it. We can certainly enjoy either Dassai.

To enjoy sake, we need some “otsumami” おつまみ appetizers. For Dassai tasting, I served warm chawam-mushi with ginko nuts, shrimp, shiiitake mushroom and the garnish was our home grown fresh “mitsuba” 三つ葉 which added a nice unique flavor (left in picture #3). The center is eggplant, shiitake and wood ear mushroom brased in oyster sauce and ginger 茄子と椎茸のオイスターソース炒め. The right is garlic chive “ohitashi” ニラのお浸し topped with golded thread omelet.

In the past we tried a few US brewed sake and Dassai Blue in definitely one of the best. Only one which is in the same class is “Sho-Chiku-Bai” daiginjou 松竹梅大吟醸 brewed from California-grown “Yamada Nishiki” sake rice. But these two cannot be compared in the same way. Sho-Chiku-Bai was produced in very limited quantity, is not readily available and has a much higher price point. On the other hand, the Dassai Blue 50 is very reasonably priced and relatively widely available.

Mitsuba ミツバ

Mitsuba 三つ葉 is a sort of Japanese parsley mainly used as a garnish or topping for certain dishes such as soup, katsu-don カツ丼 and chawan-mushi 茶碗蒸し. “Mitsuba” in Japanese means three leaves since it has three leaves. It has a very distinctive and unique flavor. In the past, I rarely got fresh ones at our Japanese grocery store and I could get dried ones which do not have much flavor. I tried to grow it a few times from the seeds (from Kitazawa seeds) which was not a great success for some reason. This time the mitsuba we planted in a pot on the window sill grew quite nicely (picture #1). 

I added this home-grown fresh mitsuba to the usual chawanmushi I make (picture #2). I mixed the stalks which were cut into small pieces into the egg mixture but I added the leaves just 30 seconds before serving. This time I served chawanmush hot just out of the steamer.

Althouhg mitsuba is not a major component of the any dishes incuding the chawanmushi, I really like the unique flavor.

Garlic Chive Dumpling ニラ頭饅 or 韮菜万頭

We used to grow garlic chives or “nira” ニラ in our herb garden but it failed in two ways: 1) the garlic chives were very fibrous except when we harvested them very young and 2) they grew like weeds taking over the entire herb garden. The plant had deep roots that were very hard to extract. It was quite a lot of work to get rid of it and we are not completely successful even now. (Digression alert: Some years ago we hired a gardener to do the spring clean up which included the herb garden. When he found out the herb garden contained garlic chives he specified the clean up would include everything EXCEPT the garlic chives.) Although we did make quite a few garlic chive dishes, we gave up growing our own. We have been shying away from even buying garlic chive for a while (besides it is not readily available). Since Weee almost always carries garlic chives, we tried them. They came in quite a large bundle (about 1 lb). We tried it in several dishes and, even though they were fully grown, the garlic chive were not fibrous at all.  We added garlic chives to our stir-fried dishes, soup and as a “ohitashi” ニラのお浸し. We still had some garlic chives left so I started looking for new recipes to use them. I came across a recipe by Koh Kentetsu on YouTube.  I was not familiar with this dish. I am not sure if this is based on a known Chinese dish or invented in Japan but it is apparently very popular. 

A quick internet search indicated that “nira-manju” or “garlic chive dumpling” was “invented” in a Chinese restaurant called “Niramanju Fussa” or “韮菜万頭福生” near the Yokota American military base 横田米軍基地. In any case, I have not tasted or seen the “original”. I made this based on the Koh Kentetsu recipe but I ended up making some changes (in the seasonings, not intentionally. Since I made this dish from memory after I saw the YouTube video). This is in the similar ilk as gyoza 餃子 and shumai  焼売 but maybe even better. We really like the garlic chive flavor and cripsy skin (picture #1). It re-heated nicely in the toaster oven. Since I seasoned the filling adequately, we did not use dipping sauce.

The innovations of his recipe is to use two sheets of store-bought wonton skin to encase the filling and the instructions of how to encase the filling very easily for a home cook. It was cooked exactly like gyoza producing a nice crispy skin on both sides (picture #2) and juicy inside.

Ingredients: (made 10 good-sized dumplings, see picture #2)
1/2 lb ground pork
1/4 lb garlic chive, finely chopped (about 1/5 in)
6-7 medium shrimp, thawed, and minced (optional)
1/2 tsp minced/graded ginger (original recipe used only ginger juice)
1/2 tsp minced/grated garlic (optional,  original recipe does not use this. My wife felt this added too much garlicky flavor)
1 large cap of fresh shiitake mushroom, finely chopped

Seasnings:
1 tsp Shao Xing wine
1 tsp oyster sauce
1 tsp soy sauce
1/2 tsp dark sesame oil

20 Wonton skins

Directions:
Add the meat, shrimp, garlic, ginger and seasonings in a bowl and mix well
Add the mushroom and garlic chives and further mix and cover. Let it stand in the refrigerator for a few hours
Using a medium sized ice cream scoop, make balls of the filling and place them on a rimmed baking sheet.
Place the wonton skin on top of the filling balls (I moistened all the edges to make sure it would stick)
Using all five fingers, press down on the edge and turn several times until the sides of the wonton skin adhere to the filling. Then flip it over (picture #3). (If you just steam this, you are making “garlic chive shumai” ニラシュウマイ).

Place the second set of wonton skin on top (I also moistened the outer edges). Using the same process, turn and totally encase the filling to make sure all sides are attached to the filling and each other
Press gently to make a disk (picture #4)

(I covered the dumplings with a plastic wrap and refrigerated 1-2 hours before cooking but this is not needed. I just wanted to have all the dumpling assembled before cooking them in the evening.)
Using a 12 inch non-stick frying pan, I added the vegetable oil with a splash of sesame oil on medium flame and browned one side (2-3 minutes) and turned it over to brown the other side for another 2-3 minutes (picture #2)
Add a small amount of water (about 1/4 cup). Cover with a tight fitting lid to steam for 2-3 minutes or until the steam stops coming out.
Remove the lid and let the moisture evaporate. Keep browning the bottom and the other side with the addition of a small amount of sesame oil toward the end of cooking.

This is a really nice dish and easier to make compared to gyoza (because you do not have to clip the edges). A good amount of garlic chive adds a nice flavor (my addition of garlic was a bit too much for my wife, I will omit it next time). This is a perfect small dish with drinks.