Our window sill basil is still growing very well. Although we use cuttings for pizzas and salads etc, we still need to harvest a relatively large quantity of basil every-once-in-a-while. Although my wife made basil cake/bread, our default to use up excess basils is making pesto. But once the pesto is made, we have to use it in a reasonable time or freeze it. Once we freeze the pesto, we tend to forget about it. We used most of the last batch for pesto and red pepper sauce pizza. My wife came up with this to use up the remaining pesto. “Pesto Blini”! This is an extension of “Roasted pepper blini”. We had it toasted as a part of breakfast it had a nice crisp crust and the pesto flavor came through as a savory dimension. We have to enjoy this with other appropriate toppings.
Ingredients(X2.5) makes 17 blini
1/2 cup pesto
5 tbs melted butter
1/2 +1/8 cup cream
5 large eggs, beaten
1 2/3 cup all-purpose flour
3 3/4 tsp baking powder
1 1/4 tsp salt
Directions:
In a medium bowl, add the egg, the pesto, the melted butter and cream, then add the flour, baking powder and salt and whisk until well blended. (You may need to add more liquid so the batter is the consistency of pancake batter.)
Melt 1 tablespoon of butter in a pyrex dish. Use the melted butter to grease each of the platar cups of a cast iron platar before adding the batter . Pour the batter into the cups until they are 1/2 full. Cook over moderately low heat, turning once, until set, about 3 to 5 minutes per side. Repeat with the remaining butter and batter.
This makes a lovely savory crumpet like bite. It also provides a nice contrast to the usual flavors that appear for breakfast and it is a great way to use up pesto left over from pesto pizza.
Thursday, September 5, 2024
Monday, September 2, 2024
Smelt Fry シシャモフライ
Smelt and Capelin (shishamo ししゃも) are all similar small fish and often (including myself) used almost interchangeably. Rarely I see “smelt” in a U.S. grocery store with head off and gutted. In oriental grocery stores, the whole fish is sold with head, gut and roe intact. If the fish has roe, all-the-better. Weee carries frozen “smelt” (label said capelin from Canada). We tried them twice so far and they are pretty good. The only problem is that it is sold in a package of 600grams (1.3 lb) of fish frozen together. I usually manage to semi-thaw them and divide it up into three or four smaller portions (7-8 fish per pack), vacuum pack and re-freeze them. It turned out these frozen smelt/capelin are quite good, probably best for frying rather than grilling. Japanese style slightly dried Capelin may be the best for grilling.
As suggested above, two common ways of cooking are grilled or fried. Frying can be “kara-age”; fried dredged with flour/potato starch, or tempura and fry with breading. The night I cooked the capelin I was also making arancini, so I breaded the capelin and fried it. I also fried seasoned quail eggs. In the picture, the left two objects are halved arancini, center two are capelin fry and the right round one (half buried under the capelin) is a quail egg. Some of the capelin had roe and tasted especially good. The arancini was made from left-over shiitake risotto with a center of meting Mozzarella cheese which by definition could not taste bad.
There is no recipe for the Capelin fry. Dredge in flour, place it in egg water and bread it with Panko bread crumb and deep fry in 180F oil for several minutes. We are glad to now have reliable source of smelt/capelin.
As suggested above, two common ways of cooking are grilled or fried. Frying can be “kara-age”; fried dredged with flour/potato starch, or tempura and fry with breading. The night I cooked the capelin I was also making arancini, so I breaded the capelin and fried it. I also fried seasoned quail eggs. In the picture, the left two objects are halved arancini, center two are capelin fry and the right round one (half buried under the capelin) is a quail egg. Some of the capelin had roe and tasted especially good. The arancini was made from left-over shiitake risotto with a center of meting Mozzarella cheese which by definition could not taste bad.
There is no recipe for the Capelin fry. Dredge in flour, place it in egg water and bread it with Panko bread crumb and deep fry in 180F oil for several minutes. We are glad to now have reliable source of smelt/capelin.
Monday, August 12, 2024
Icelandic Pumpernickel (Rye) Bread アイスランドのライ麦パン
My wife wanted to use pumpernickel flour (whole or dark rye flour) before it gets too old. We have already made “classic” pumpernickel bread and also German Black (Pumpernickel) boule. We found a recipe for “Icelandic Rye (pumpernickel) bread” at King Arthur Flour website. The recipe appeared interesting. Since it is a “soda” bread, my wife took the initiative for making it (soda bread is not my shtick). This bread turned out to be pretty good and the texture/density is something between the classic pumpernickel bread and Pumpernickel boule (picture #1). It is a bit sweeter and made perfect sandwich bread (picture #2).
This was a lunch. We happened to have a hot smoked (in Weber grill) pork roast. I made sandwiches with avocado slices, mayo and Dijon mustard.
Ingredients:
4 1/2 cups (477g) Pumpernickel Flour (original recipe calls for “medium” rye flour)
2 teaspoons table salt
1 tablespoon baking powder
3/4 teaspoon baking soda
2 cups (454g) buttermilk
1/2 cup (168g) honey
1/2 cup (170g) molasses
Directions:
Preheat the oven to 325°F with a rack in the center position.
In a large bowl, whisk together the flour, salt, baking powder, and baking soda.
In a separate bowl, whisk together the buttermilk, honey, and molasses.
Pour the wet ingredients into the dry ingredients, stirring to combine.
Transfer the batter to a lightly greased 9" pain de mille (pullman) pan and smooth the top. Lightly grease the lid, and place the lid on the pan. (We do not have a pullman pan so I just used a regular loaf pan. Luckily I put a tray underneath because the batter over flowed the loaf pan big time). Next time I will put the batter into two loaf pans.)
Bake the bread for 2 hours. Turn off the oven and remove the lid from the pan. Leave the loaf in the turned-off oven for another 15 minutes, then remove from the oven and turn out of the pan onto a cooling rack.
Since this bread is denser than usual sandwich bread, I sliced it a bit thinly and made perfect roast pork sandwiches.
This was a lunch. We happened to have a hot smoked (in Weber grill) pork roast. I made sandwiches with avocado slices, mayo and Dijon mustard.
Ingredients:
4 1/2 cups (477g) Pumpernickel Flour (original recipe calls for “medium” rye flour)
2 teaspoons table salt
1 tablespoon baking powder
3/4 teaspoon baking soda
2 cups (454g) buttermilk
1/2 cup (168g) honey
1/2 cup (170g) molasses
Directions:
Preheat the oven to 325°F with a rack in the center position.
In a large bowl, whisk together the flour, salt, baking powder, and baking soda.
In a separate bowl, whisk together the buttermilk, honey, and molasses.
Pour the wet ingredients into the dry ingredients, stirring to combine.
Transfer the batter to a lightly greased 9" pain de mille (pullman) pan and smooth the top. Lightly grease the lid, and place the lid on the pan. (We do not have a pullman pan so I just used a regular loaf pan. Luckily I put a tray underneath because the batter over flowed the loaf pan big time). Next time I will put the batter into two loaf pans.)
Bake the bread for 2 hours. Turn off the oven and remove the lid from the pan. Leave the loaf in the turned-off oven for another 15 minutes, then remove from the oven and turn out of the pan onto a cooling rack.
Since this bread is denser than usual sandwich bread, I sliced it a bit thinly and made perfect roast pork sandwiches.
Friday, August 9, 2024
Home Coffee Roasting 緑コーヒー豆の自家焙煎
I do not remember when I started home roasting green coffee beans but it was sometime ago. I started with an electric popcorn popper, then over time used 4-5 different hot air roasters (many broke, some were discontinued. Only one hot air roaster is still working but I am not using it any longer). I also had a drum roaster (Behmor 1600) on which I upgraded the control panel and it is still working but is a bit unreliable. I am currently using a “Gene Cafe” roaster (picture #1). I am not sure this should be classified as a drum or hot air roaster. It is probably more along the line of the hot air roaster.
General summary: Most roasters are too loud to hear the both the first and second cracks which are important determinants of the stage of roasting the beans have achieved. The roasters also produce a lot of smoke so they have to be used outside or in very well ventilated spaces. Over time, however, I have discovered that the shape of some of the roasters make it possible to temporarily attach a drier vent duct to the roaster to channel the smoke directly up to the vent hood over the stove. With this temporary set-up the roaster can be used indoors under the hood. All the roasters, especially hot air roasters, are quite sensitive to ambient temperature as well as the voltage fluctuation. Some models have, although limited, programable temperature profiles. For some roasters the amount of green beans you can roast is also limited.
1. Hot air roasters: This type is easy to use but you cannot hear the first or second cracks to judge the roasting stages due to the loud noise made by the machine.
2. Drum roaster: Behmor 1600 (the current model is 2000AB plus) is the only drum roaster I have used. This is composed of a wire mesh drum and a radiant heat source in the back of the drum. This is a very quiet machine and I could hear both first and second cracks. There are some roasting programs you can choose or you could use your own temperature profile. This worked well but their “smoke suppression system” does not really work and there was no way to attach a drier duct for venting so I could only use this machine outside. In addition the chaff collector is not very convenient and, in general, cleaning is not easy. The capacity is unusually large and it can roast up to 1 pound. The newer model appears to have more controls and other improvements. Over time and with much use the machine became unreliable. The drum would stop turning in the middle of roasting. I would have to shut off the machine and then restart it. As a result I would lose control of the timing of the roast and the beans would come out over or under roasted.
3. Current roaster: Gene Cafe, It has an off-axis glass cylinder drum and you can clearly see the beans while roasting (picture #1) . The chaff collector is large and quite good and allows the attachment of the clothes drier duct and can be used in-doors under the hood. When used outside without the noise of an exhaust fan under the hood I can hear the first crack very well but the second crack is difficult to hear. When used in-doors with an exhaust fan going, I cannot hear either of the cracks. It can roast up to 8oz of coffee in one batch. I am reasonably satisfied with this roaster but cooling takes a long time and chaff removal is not perfect.
To compensate these two short comings, recently, I added another coffee roasting contraption which is the “coffee cooling tray” (picture #2). This is rather simple device but works well. The fan and motor are located at the bottom layer sucking air from top and out. The top sieve has a coarse metal screen where the hot coffee beans get placed (#3) and the middle sieve has a fine metal screen to catch the chaff (#4).
A tiny metal “shovel” is included for stirring (#3).
While cooling, stirring the beans further removes the chaff which is collected in the second sieve (#4).
The hot coffee beans cool down very quickly and quite more chaff comes off. One of the major difficulties is that the Gene Cafe is not designed to be used with an external cooler. After it goes into the cool down cycle, the temperature has to come down below a certain level (I have not determined the exact temp) before you can stop and remove the cylinder/drum which defeats having the external cooling tray. The only way you can remove the cylinder while it is hot is to force it off (by unplugging the machine), removing the cylinder and dumping the hot coffee beans into the cooling tray. This may not be good for the roaster, however. So, this is what I came up with.
1. I line up an extra roasting cylinder and the cooling tray turned on next to the roaster.
2. After the roasting is completed, I put the roaster into the cooling cycle. Wait about 1 minute until the temperature comes down below 400F then unplug the machine (making sure the cylinder position allows me to remove the cylinder when it stops).
3. I remove the cylinder and dump the hot coffee beans into the cooling tray and place the spare cylinder back into the roaster(You could put back the original cylinder after dumping the beans but this is difficult since the cylinder is hot and seemingly expands enough to make putting it back more difficult.)
4. Plug the roaster back in and turned it on. Start “roasting” and immediately turn it to the cooling cycle and let it cool down until it stops. (I am hoping this procedure is the least harmful for the roaster).
So, is all this effort worth it? Although I think I know what I like in my coffee/expresso drinks, I am not sure I can differentiate beans cooled quickly vs slowly in the roaster cooling cycle. Other factors such as beans, roasting level, grind, how the espresso is brewed may make more significant differences. Never-the-less, I try to do everything in the right and consistent way so that I can have coffee we like.
General summary: Most roasters are too loud to hear the both the first and second cracks which are important determinants of the stage of roasting the beans have achieved. The roasters also produce a lot of smoke so they have to be used outside or in very well ventilated spaces. Over time, however, I have discovered that the shape of some of the roasters make it possible to temporarily attach a drier vent duct to the roaster to channel the smoke directly up to the vent hood over the stove. With this temporary set-up the roaster can be used indoors under the hood. All the roasters, especially hot air roasters, are quite sensitive to ambient temperature as well as the voltage fluctuation. Some models have, although limited, programable temperature profiles. For some roasters the amount of green beans you can roast is also limited.
1. Hot air roasters: This type is easy to use but you cannot hear the first or second cracks to judge the roasting stages due to the loud noise made by the machine.
2. Drum roaster: Behmor 1600 (the current model is 2000AB plus) is the only drum roaster I have used. This is composed of a wire mesh drum and a radiant heat source in the back of the drum. This is a very quiet machine and I could hear both first and second cracks. There are some roasting programs you can choose or you could use your own temperature profile. This worked well but their “smoke suppression system” does not really work and there was no way to attach a drier duct for venting so I could only use this machine outside. In addition the chaff collector is not very convenient and, in general, cleaning is not easy. The capacity is unusually large and it can roast up to 1 pound. The newer model appears to have more controls and other improvements. Over time and with much use the machine became unreliable. The drum would stop turning in the middle of roasting. I would have to shut off the machine and then restart it. As a result I would lose control of the timing of the roast and the beans would come out over or under roasted.
3. Current roaster: Gene Cafe, It has an off-axis glass cylinder drum and you can clearly see the beans while roasting (picture #1) . The chaff collector is large and quite good and allows the attachment of the clothes drier duct and can be used in-doors under the hood. When used outside without the noise of an exhaust fan under the hood I can hear the first crack very well but the second crack is difficult to hear. When used in-doors with an exhaust fan going, I cannot hear either of the cracks. It can roast up to 8oz of coffee in one batch. I am reasonably satisfied with this roaster but cooling takes a long time and chaff removal is not perfect.
To compensate these two short comings, recently, I added another coffee roasting contraption which is the “coffee cooling tray” (picture #2). This is rather simple device but works well. The fan and motor are located at the bottom layer sucking air from top and out. The top sieve has a coarse metal screen where the hot coffee beans get placed (#3) and the middle sieve has a fine metal screen to catch the chaff (#4).
A tiny metal “shovel” is included for stirring (#3).
While cooling, stirring the beans further removes the chaff which is collected in the second sieve (#4).
The hot coffee beans cool down very quickly and quite more chaff comes off. One of the major difficulties is that the Gene Cafe is not designed to be used with an external cooler. After it goes into the cool down cycle, the temperature has to come down below a certain level (I have not determined the exact temp) before you can stop and remove the cylinder/drum which defeats having the external cooling tray. The only way you can remove the cylinder while it is hot is to force it off (by unplugging the machine), removing the cylinder and dumping the hot coffee beans into the cooling tray. This may not be good for the roaster, however. So, this is what I came up with.
1. I line up an extra roasting cylinder and the cooling tray turned on next to the roaster.
2. After the roasting is completed, I put the roaster into the cooling cycle. Wait about 1 minute until the temperature comes down below 400F then unplug the machine (making sure the cylinder position allows me to remove the cylinder when it stops).
3. I remove the cylinder and dump the hot coffee beans into the cooling tray and place the spare cylinder back into the roaster(You could put back the original cylinder after dumping the beans but this is difficult since the cylinder is hot and seemingly expands enough to make putting it back more difficult.)
4. Plug the roaster back in and turned it on. Start “roasting” and immediately turn it to the cooling cycle and let it cool down until it stops. (I am hoping this procedure is the least harmful for the roaster).
So, is all this effort worth it? Although I think I know what I like in my coffee/expresso drinks, I am not sure I can differentiate beans cooled quickly vs slowly in the roaster cooling cycle. Other factors such as beans, roasting level, grind, how the espresso is brewed may make more significant differences. Never-the-less, I try to do everything in the right and consistent way so that I can have coffee we like.
Wednesday, July 31, 2024
Tofu, Egg and Garlic Chives Stir Fry 豆腐ニラ玉、木耳入り
This is one of the left-over control dishes. I had a package of “medium firm” tofu 豆腐 which just reached “BUB” (Best Used By) date, the last of garlic chive ニラand wood ear mushroom 木耳. So, I made this dish for lunch one day. I sort of got an idea from some of the recipes I saw on the Web and YouTube. Based on my memory and CCK (Common Culinary Knowledge) I winged it. The seasonings could be improved but overall this was a quite good satisfying dish and fairly healthy and nearly vegetarian (I am not sure if oyster sauce really contains oysters or their derivatives). Depending on how much seasoning you add, this could be a side dish for rice but I seasoned it lightly and we had it as a main dish for lunch.
Ingredients:
One package of tofu (I used medium firm but firm would be good), drained and cut into cubes (#1 in the composite picture).
Two eggs, beaten and seasoned with a pinch of salt (#2)
Wood ear mushroom (optional, this was leftover, I blanched, washed it previously and cut into small trips, the amount is arbitrary) (#4)
Garlic chive, washed and cut into short segments, the amount arbitrary (#4)
2 tbs vegetable oil or peanut oil and a splash of dark sesame oil
Seasonings (#2): (premix, #2)
2 tbs oyster sauce
2 tbs soy sauce
2 tbs Shaoxing wine (or dry sherry or mirin, which makes it sweeter, or sake)
1 tsp Ponzu sauce
Directions:
Add the oil to the non-stick frying pan on medium high flame and cook turning once or twice until the surface is lightly browned (2-3 minutes) (#1 in the composite picture)
Reduce the flame to medium and pour in the egg mixture (#3) cook until the edges are set and gently turn and coat the tofu cubes
Add the seasonings and cook for 30 seconds mixing gently
Add the garlic chive and wood ear mushroom (#4)
Mix and toss to combine for 30 seconds to 1 minute
Splash the ponzu sauce and a small amount of sesame oil and mix to finish
I felt a bit self righteous finishing up the tofu, garlic chive and wood ear mushrooms by making this dish and nothing wasted. But better yet it was pretty good. The tofu went extremely well with the egg coating. The tofu and egg had similar texture but each brought a slightly different taste which was interesting in the same bite. The wood ear mushroom brought its own element to the dish in the form of a slight crunchiness that offset the tofu/egg texture. The garlic chive contributed a distinctly but mild garlic taste. Not a bad left-over control dish which can bear repeating.
Ingredients:
One package of tofu (I used medium firm but firm would be good), drained and cut into cubes (#1 in the composite picture).
Two eggs, beaten and seasoned with a pinch of salt (#2)
Wood ear mushroom (optional, this was leftover, I blanched, washed it previously and cut into small trips, the amount is arbitrary) (#4)
Garlic chive, washed and cut into short segments, the amount arbitrary (#4)
2 tbs vegetable oil or peanut oil and a splash of dark sesame oil
Seasonings (#2): (premix, #2)
2 tbs oyster sauce
2 tbs soy sauce
2 tbs Shaoxing wine (or dry sherry or mirin, which makes it sweeter, or sake)
1 tsp Ponzu sauce
Directions:
Add the oil to the non-stick frying pan on medium high flame and cook turning once or twice until the surface is lightly browned (2-3 minutes) (#1 in the composite picture)
Reduce the flame to medium and pour in the egg mixture (#3) cook until the edges are set and gently turn and coat the tofu cubes
Add the seasonings and cook for 30 seconds mixing gently
Add the garlic chive and wood ear mushroom (#4)
Mix and toss to combine for 30 seconds to 1 minute
Splash the ponzu sauce and a small amount of sesame oil and mix to finish
I felt a bit self righteous finishing up the tofu, garlic chive and wood ear mushrooms by making this dish and nothing wasted. But better yet it was pretty good. The tofu went extremely well with the egg coating. The tofu and egg had similar texture but each brought a slightly different taste which was interesting in the same bite. The wood ear mushroom brought its own element to the dish in the form of a slight crunchiness that offset the tofu/egg texture. The garlic chive contributed a distinctly but mild garlic taste. Not a bad left-over control dish which can bear repeating.
Sunday, July 28, 2024
Cucumber in soy sauce 胡瓜の醤油漬け
I would like to have fresh cucumbers (if available Japanese cucumber but American mini-cucumber is a great substitute). Usually American min-cucumbers come in a pack of 6. If not used within 2-3 days, they go bad (white specks, either bacteria or fungus, develop on the surface). I make several kinds of cucumber salads and pickles in an attempt to use up the cucumbers. Currently our favorite pickled cucumber is using leftover pickling liquid after making the daikon pickles. In addition, I also try to preserve fresh cucumbers by placing them in a Ziploc bag and pouring enough Vodka to coat all the surface plus a bit more and then I squeeze out as much air from the bag as I can. With this treatment, the fresh cucumber last about one week or a bit more. I am always looking for other recipes to use cucumbers. I saw this recipe in one of the Ko Kentetsu You Tube episodes. It is easy enough and looks interesting. This is marinated about 3 days. It is still crunchy. Soy sauce and vinegar make the foundation but the addition of ginger and a small slash of dark sesame oil really make it.
Ingredients:
3 American mini-cucumbers or 2 Japanese cucumbers.
Fine julienne of ginger root
Marinade:
1 tbs sugar
2 tbs soy sauce
2 tbs rice vinegar
Small splash of dark sesame oil
Directions:
Cut the cucumbers length wise in half
Remove the seeds using a small spoon
Cut the cucumber on a bias in bite sized pieces
Add the cucumber, ginger and the marinade to a sealable container. Close the container and refrigerate.
You can enjoy this immediately or in few days.
We like this. It is very easy to make and slight sweetness combided with the sesame oil and ginger really make this a good side dish or “Hashi-yasume” 箸休め meaning “chopsticks rest” so that the chopsticks take a brief rest after heavy lifting of main dishes.
Ingredients:
3 American mini-cucumbers or 2 Japanese cucumbers.
Fine julienne of ginger root
Marinade:
1 tbs sugar
2 tbs soy sauce
2 tbs rice vinegar
Small splash of dark sesame oil
Directions:
Cut the cucumbers length wise in half
Remove the seeds using a small spoon
Cut the cucumber on a bias in bite sized pieces
Add the cucumber, ginger and the marinade to a sealable container. Close the container and refrigerate.
You can enjoy this immediately or in few days.
We like this. It is very easy to make and slight sweetness combided with the sesame oil and ginger really make this a good side dish or “Hashi-yasume” 箸休め meaning “chopsticks rest” so that the chopsticks take a brief rest after heavy lifting of main dishes.
Wednesday, July 17, 2024
Dassai 45 and Dassai blue comparison 獺祭45とDassai Blue 50 の飲み比べ
“Dassai” 獺祭 is a well known and popular sake in Japan and US. We like it for its very clean, fruity flavors. We used to get “Dassai 50” daiginjo 獺祭50大吟醸. But the Dassai 50 is not sold any more. It was replaced by “Dassai 45” in 2019 (In Dassai 50, the sake rice is polished to 50% of the original volume, in Dassai 45, it is polished to 45%). We learned that Dassai (brewed by Asahi Sake Brewery 朝日酒造 in Yamaguchi 山口県) established a sake brewery in Hyde Park, NY some years ago. However, this is the first time we obtained several bottles of the NY-brewed sake “Dassai Blue 50”. Interestingly, Dassai Blue is labeled as “Type 50”. I assume that indicates 50% polish like the old Dassai 50. My understanding based on an article I read, was that they used imported Japanese “Yamada Nishiki” 山田錦 sake rice. But another source of information (again, not their website) indicated the rice is grown in Arkansas. (Further more, I would have to wonder what water source* they are using in the brewing; NY tap water, Hudson river water, or Hyde Park artesian well water???) In any case, one evening we compared Dassai blue and Dassai 45 (picture #1).
*One on-line store website indicates the sauce of the water is a “local well”. But again, this is unofficial information.
The Dassai Blue, when first tasted, has a definitive tingling/prickly sensation on the tip of the tongue. It is like very lightly effervescent. Then comes a very subtly sweet and Dassai signature fruity taste. As it sits in the glass, the tingling character diminishes indicating indeed this might be the effervescence. The “Dassai Blue” label indicated “keep refrigerated”. I wonder if the label “keep refrigerated” means, “Blue”may be “Nama” sake 生酒** or not heat-treated and slight fermentation happened in the bottle producing the effervescence. (Again no details are available from the brewery and these are all our conjuncture).
**Another unofficial information indicated “Blue” only had one “hi-ire” 火入れ heat-treatment instead of usual two (after pressing and bottling).
The Dassai 45 is a classic Dassai, clean, fruity and smooth in the mouth—no effervescence or tingly sensation.
Which one do we like better? It is hard to say. Dassai Blue’s tingling sensation is not unpleasant (we had similar effervescence in other “non-sparkling” sake). According to the label (picture #2), they are aiming to surpass Dassai brewed in Japan but not just to reproduce it. We can certainly enjoy either Dassai.
To enjoy sake, we need some “otsumami” おつまみ appetizers. For Dassai tasting, I served warm chawam-mushi with ginko nuts, shrimp, shiiitake mushroom and the garnish was our home grown fresh “mitsuba” 三つ葉 which added a nice unique flavor (left in picture #3). The center is eggplant, shiitake and wood ear mushroom brased in oyster sauce and ginger 茄子と椎茸のオイスターソース炒め. The right is garlic chive “ohitashi” ニラのお浸し topped with golded thread omelet.
In the past we tried a few US brewed sake and Dassai Blue in definitely one of the best. Only one which is in the same class is “Sho-Chiku-Bai” daiginjou 松竹梅大吟醸 brewed from California-grown “Yamada Nishiki” sake rice. But these two cannot be compared in the same way. Sho-Chiku-Bai was produced in very limited quantity, is not readily available and has a much higher price point. On the other hand, the Dassai Blue 50 is very reasonably priced and relatively widely available.
Subscribe to:
Posts (Atom)